Yantai Rocka Spiral Drilling Rig

The auger drilling rig is a type of spiral blade drilling rig, including the frame of the rig. The frame is equipped with a slide rail and a reduction box, and the reduction box can slide up and down on the slide rail. The gearbox is connected to the power input shaft and the power output shaft. The other end of the power input shaft is connected with a hydraulic motor, the other end of the power output shaft is connected with a drill rod, and the lower end of the drill rod is connected with a drill bit.

parameter	unit	SK2000	SK3000	SK4000	SK5000	SK6000	SK7000
Tonnage of excavator	Ton	1.5 ~ 3	2 ~ 4	2.5 ~ 4.5	3~5	4 ~ 6	4.5 ~ 6
Working torque	Nm	2510	3100	3760	5580	6120	7300
Work pressure	Bar	60 ~ 238	70 ~ 238	80 ~ 238	80 ~ 238	80 ~ 238	80 ~ 238
Oil flow	Lpm	20 ~ 70	25 ~ 70	30 ~ 75	45 ~ 80	50 ~ 85	50 ~ 85
Output diameter	mm	65	65	65	75	75	75
Unit diameter	mm	200	200	200	270	270	270
weight	Kg	55	58	60	96	97	100

parameter	unit	SK8000	SK10000	SK12000
Tonnage of excavator	Ton	5 ~ 8	8 ~ 13	13 ~ 17
Working torque	Nm	7240	10800	12300
Work pressure	Bar	80 ~ 238	80 ~ 238	80 ~ 238
Oil flow	Lpm	50 ~ 95	60 ~ 110	60 ~ 110
Output diameter	mm	75	75	75
Unit diameter	mm	270	290	290
weight	Kg	152	155	155

*The above parameters will change with product updates.